Made in 200D recycled Gore-Tex Pro fabric and inspired by the classic overall, the tamok Gore-Tex bib is our most durable and protective freeride pants.
Forest rides, slushy spring or powder pillows – the tamok Gore-Tex Pro Bib can deal with any freeride condition. This highly functional Gore-Tex Pro bib is based on the classic workwear overall, offering the optimal combination of style and protection.
Made in 200D recycled Gore-Tex Pro fabric, these will easily face rough weather and are not afraid of some serious wear and tear. Mesh lined zipper vents on both sides will keep the pow out and the air flowing when heating up.
The left zip goes all the way up to the top to take the bib on or off. The Vectran-reinforced lower leg is kept slightly wide to make room for ski and snowboard boots without having to use a zip.
When done with the ride, you can narrow the leg with snap buttons. Other features include two spacious thigh pockets, a key pocket, stretchy and adjustable suspenders, and a 4-way stretch panel in the back for great movement and ventilation.
The full covering front is kept crisp and clean and is adorned by two pockets with plenty of room for stash – one of them with two internal compartments. Zipped fly on the men’s pants.
These pants are guaranteed to keep you both dry and good looking on epic powder days as well as slushy rides in the spring.
Features
• Weight 658 gr.
• 38mm adjustable suspenders
• Aramid lower leg reinforcement
• Articulated knee construction
• Back panel in breathable stretch fabric
• Drop seat construction
• Entrance/exit through one side extended side venting
• Exterior hangloop
• Horizontal zipped chest pocket with interior organizer
• Large chest pocket with flap and snap closure
• Napoleon chest pocket with YKK water-resistant zipper
• Phone pocket inside right thigh pocket
• Snap tightening around ankles
• Snow gaiters
• Taped seams with thin GORE-TEX® 13 mm tape
• Thigh pockets with bellows and YKK® water-resistant zips
• Two thigh pockets
• Vectran™ reinforced inside ankles
• X-open side zip ventilation with mesh
• Fabrics
GORE-TEX® Pro: GORE-TEX® Pro is the most durable fabric technology from GORE-TEX® for outdoor use. The GORE-TEX® membrane uses a woven liner to reduce weight and bulk, enhance moisture transport and minimize abrasion, all while maintaining durable waterproofness. The ultimate storm-protection fabric. Technical specification: Waterproof: min. 28,000 mm* Breathablility: High, down to 9 RET** Windproofness: 100% * ISO 811-test ** ISO11092-test
Oeko-Tex® Certified Standard: Oeko-Tex® is an independent testing and certification system for raw, semi-finished, and finished textile products at all processing levels. To be certified all parts of an article must meet the required criteria – in addition to the outer fabric, for example, also the sewing threads, inserts, prints etc., as well as non textile accessories, such as buttons, zip fasteners, rivets etc.
Bluesign® Approved Fabric: The independent bluesign® system pursues the unique approach to minimize the environmental impact of materials throughout the production process. The so-called Input Stream Management ensures that all during the textile production process applied substances and raw materials are already verified in advance of the production. The system focus guarantees the application of sustainable ingredients in a cleaner process that reduces water and air emissions, improves its waste water treatment and generally reduces its ecological footprint.
DWR: Durable Water Resistant (DWR) finish to prevent surface saturation of the textiles. Contains of short chain fluorocarbon based C6.|-|Sentiers en forêt, neige de printemps fondue ou amas de poudreuse, la salopette tamok Gore-Tex Pro est conçue pour faire face à toutes les conditions de freeride.
Sentiers en forêt, neige de printemps fondue ou amas de poudreuse, la salopette tamok Gore-Tex Pro est conçue pour faire face à toutes les conditions de freeride. Inspirée des bleus de travail classiques, cette salopette ultrafonctionnelle en Gore-Tex Pro offre une solution optimale alliant style et protection.
Fabriquée dans un tissu recyclé Gore-Tex Pro 200D, elle résiste facilement aux intempéries et ne craint pas l’usure. Les fentes latérales doublées en mesh et à fermeture Éclair permettent la circulation de l’air tout en empêchant l’infiltration de neige.
La fermeture Éclair de gauche s’étend sur toute la longueur de la salopette pour son enfilage/retrait. Le bas des jambes renforcé en fibres Vectran est légèrement élargi pour accueillir des chaussures de ski et de snowboard sans avoir à utiliser de fermeture Éclair.
Une fois votre descente terminée, vous pouvez affiner le bas de la salopette à l’aide des boutons-pression. La salopette présente également deux grandes poches sur les cuisses, une poche pour les clés, des bretelles stretch et réglables, et un empiècement stretch dans les 4 sens au dos pour une grande liberté de mouvement et une excellente ventilation.
L’avant de la salopette simple et net est agrémenté de deux poches assez spacieuses pour ranger vos affaires, et l’une d’entre elles compte deux compartiments internes. Braguette à fermeture Éclair sur le pantalon pour homme.
Ce pantalon vous gardera au sec et à l’aise lors des journées épiques de poudreuse, ainsi que lors de vos descentes sur la neige fondue de printemps.
Caractéristiques
• Poids 658 gr.
• 38mm bretelles adjustables
• Renfort en aramide au bas des jambes
• Genoux articulés
• Fermeture Éclair au niveau des fesses
• Serrage par pression autour des chevilles
• Guêtres
• Deux poches sur la cuisseVectran™ reinforced inside ankles
• Composition
GORE-TEX® Pro : la membrane en GORE-TEX® présente une doublure tissée pour réduire le poids et l’épaisseur, améliorer l’évacuation de l’humidité et minimiser l’abrasion, tout en restant durablement imperméable. Le meilleur tissu contre les intempéries.
Oeko-Tex® Certified Standard
Tissu approuvé par bluesign® : Le système indépendant bluesign® poursuit une approche unique pour minimiser l’impact environnemental des matériaux tout au long du processus de production. La « gestion intelligente des flux d’entrée » permet de vérifier toutes les matières premières et substances avant leur utilisation dans le processus de production textile. Le système garantit l’utilisation d’ingrédients durables dans le cadre d’un processus plus propre, qui contribue à réduire les émissions dans l’eau et dans l’air, améliorer le traitement des eaux usées et diminuer globalement son empreinte écologique.
DWR : Traitement hydrofuge durable ayant pour but d’éviter toute saturation sur la surface des textiles. Contient du C6 à base de fluorocarbone à chaîne courte.





































Reviews
There are no reviews yet.